Batch resize ignores action specs

[toners]

I've recorded an action that resizes an image to 4 inches by 6 inches at 240 ppi, saves it as a jpeg to another folder, and closes the file. When I apply the action to an individual image things work out fine. But in batch mode, selecting the folder of images I want to work on and the folder to save the results in, the images end up with the right number of pixels (1440x960), but they are shmeared all over a 20 by 13.333 inch image at 72 ppi. I get the same result in both CS and 7, so I am thinking it isn't them, it's me. Can anybody clue in the clueless? :confused:

[easternherp]

Can you post the action so that we can download it and try it to see what you are getting?

[toners]

OK, here is my brilliantly conceived action. It is so simple I am embarassed. Note that when you double click the resize step, the document size is 4x6 at a resolution of 240 ppi. And that is what I get when the action is applied to an open image. The problem occurs when I run a batch. Then the resolution of the saved files mysteriously is set to 72 ppi.

[easternherp]

Hi Tony,

Just tried your action and had no problems. It came out at 240 dpi at 6x4 inches. Batch or single process.

[Linda G]

What do your settings on this page show? That could make a difference.